Skip to content

The Edit — Home & Garden

12V vs 20V Drill: Which One Do You Need?

A 12V drill is lighter and fits tight spaces; a 20V drill has more power for big holes and long screws. What the two numbers mean, which jobs need which, and 4 drills to choose from.

ByEdith Mercer AI analyst·Published November 21, 2026·5 min read

This guide is research-led: we have not handled these units ourselves. If you buy through our links we may earn a commission — it never changes a pick.Research-led, nothing handled. We may earn from links; it never changes a pick. How we choose

THE EDIT — HOME & GARDEN 12V vs 20V Drill: Which One Do You Need? A 12V drill is lighter and fits tight spaces; a 20V drill has more power for big holes and long screws. LIFESTYLE THE EDIT — HOME & GARDEN 12V vs 20V Drill: Which One Do You Need? LIFESTYLE
Photograph Anastasia Shuraeva via Pexels

This page explains what 12V and 20V mean on a cordless drill and which household jobs need which, then names 4 drills from the 2 classes, chosen as How we choose describes. Nothing here was handled or tested.

At a glance

The voltage is the battery’s size, and the 2 classes are 10.8V and 18V

The number on a cordless drill names its battery class, and the battery sets how much power the motor can draw. A 20V MAX tool runs at 18 volts in use and a 12V MAX tool at 10.8, so the bigger class has about 1.7 times the voltage. More voltage lets the drill keep turning under load, through a long screw or a wide bit.

Class Nominal voltage Suits
12V MAX 10.8V Furniture, hooks, cabinets, overhead work
20V MAX or 18V 18V Decking, big holes, masonry anchors, daily use

A 20V drill is for decking, big holes and long screws

Pick 20V when the work pushes back: 3-inch screws into a deck joist, a 1-inch spade bit through a stud, or a day of building. The DeWalt DCD771C2 has a 1/2-inch chuck, which takes bits with shanks up to half an inch, and 2 speeds: 0 to 450 rpm for driving and 0 to 1,500 for drilling. DeWalt rates it at 300 watts out. This kit adds a 100-piece bit set.

Best 20V

DEWALT 20V MAX Drill/Driver Kit with 100-Piece Bit Set (DCD771C2)

DeWalt's compact 20V drill with a 1/2-inch chuck, 2 speeds and a 100-piece bit set in the box.

Specifications for DEWALT 20V MAX Drill/Driver Kit with 100-Piece Bit Set (DCD771C2)
Voltage20V max, 18V nominal
Chuck1/2 in
Speeds0-450 and 0-1,500 rpm

A 1/2-inch chuck and 2 speeds, for the jobs a 12V drill struggles with.

Buy it if

  • Decking screws, big holes and a first toolbox

Don't buy it if

  • Overhead work all afternoon

The cheaper way into 20V is the Black+Decker BCD702C1. It has an 11-position clutch, 1 battery, a charger and a single bit, and it suits shelves and flat-pack better than a deck.

Budget 20V

BLACK+DECKER 20V MAX Cordless Drill Kit (BCD702C1)

A light-duty 20V drill with an 11-position clutch, a battery, a charger and 1 bit.

Specifications for BLACK+DECKER 20V MAX Cordless Drill Kit (BCD702C1)
Voltage20V max, 18V nominal
Clutch11 positions
In the boxDrill, battery, charger, 1 bit

The 20V battery on a light-duty drill, for a toolbox on a budget.

Buy it if

  • Shelves and flat-pack on a budget

Don't buy it if

  • Heavy, daily or masonry work

A 12V drill is lighter, and that matters overhead

Most household drilling never needs 18 volts: a curtain rail, a TV bracket into a stud, a bookcase from a box. A 12V drill does those jobs and is lighter to hold at arm’s length. The Black+Decker BDCDD12C weighs 2.8 pounds, with an 11-position clutch so screws stop before they strip, and an LED light that comes on with the trigger.

Budget 12V

BLACK+DECKER 12V MAX Cordless Drill/Driver (BDCDD12C)

A 2.8 lb 12V drill with an 11-position clutch and an LED light, battery and charger included.

Specifications for BLACK+DECKER 12V MAX Cordless Drill/Driver (BDCDD12C)
Voltage12V max, 10.8V nominal
Weight2.8 lb
Clutch11 positions

A light 12V drill with battery and charger, for small jobs around the home.

Buy it if

  • A first drill for small jobs around the home

Don't buy it if

  • Long screws into hardwood

Brushless and good heads close most of the gap

A good 12V drill can outwork a cheap 20V one, because the motor and the chuck matter as well as the battery. The Bosch GSR12V-300FC has a brushless motor, which Bosch says gives longer runtime, with 300 inch-pounds of torque and up to 1,750 rpm. Its FlexiClick system swaps between 4 heads: a keyless chuck, a locking bit holder, a right-angle head and an offset-angle head for driving screws close to a wall. The kit has 2 batteries of 2.0Ah and a charger.

Best 12V

BOSCH GSR12V-300FCB22 12V Max Drill/Driver with 5-In-1 FlexiClick

A brushless 12V drill with 300 in-lbs of torque, 2 batteries and 4 snap-on heads, including a right-angle one.

Specifications for BOSCH GSR12V-300FCB22 12V Max Drill/Driver with 5-In-1 FlexiClick
Torque300 in-lbs
SpeedUp to 1,750 rpm
Batteries2 x 2.0Ah

A brushless 12V drill with 4 heads, for cabinets, corners and tight spots.

Buy it if

  • Cabinets, tight corners and work above the head

Don't buy it if

  • A 20V battery to share with other tools

The battery platform is the bigger decision

A drill is usually the first tool on a battery system, and each brand’s 12V and 20V batteries do not swap with each other. Buy the class that the next tools will need too: an impact driver, a saw or a leaf blower usually means 20V. The drill against impact driver explainer covers the second tool, and the cordless drills guide compares 5 drills in more depth.

Keep reading

Ask an AI

Still deciding? Ask your AI assistant about this guide.

One tap opens the assistant you already use, with a question about these picks ready to send. Change it first if you like.

The question it sends

I'm shopping and reading "12V vs 20V Drill: Which One Do You Need?" on The Slick List (https://www.theslicklist.com/12v-vs-20v-drill/). Summarise what it recommends, who each pick suits and the main complaint owners report, then help me decide which one fits me. Please base your answer on https://www.theslicklist.com/12v-vs-20v-drill/.